SCREEN PRINTING FLASH DRYER RAPIDRY PRO
February 15, 2026 - Equipment
- Power can be adjusted digitally
- Curing duration is set as seconds while operating the timer counts down the remaining time
- Lamps divided into three independently operated zones or in any combination
- Can be started using an optical sensor switch or a signal from the automatic printing machine (communication cable and socket included)
- Special filament design lowers energy costs and increases the lifetime
- Optional temperature sensor displays the actual temperature of the printed garment
- Shuts off the flash at the set temperature
- Ultra-economic medium wavelength lamps reduce electric consumption
- Lamps have their own reflectors to increase efficiency
- Perforated stainless steel laser cuts reflector heated forced-air obtained by the powerful blower
- Adjustable stand height
- Easily portable
- Independent button to test-start
- EBM PAPST aluminum blower
- The powerful blower of RAPIDRY PRO provides forced air to cure the ink rapidly
- The control head is cooled with high efficient aluminum heat sink instead of a fan, so all electronic system remains clean
- User-friendly
- The adjustable preheating function keeps the filament hot
- Maximum power can be limited and locked on the control panel
TDS FLASH DRYER RAPIDRY PRO
| Model | Rapid Dry Pro45 x 55 | Rapid Dry Pro50 x 70 | Rapid Dry Pro60 x 80 | Rapid Dry Pro70 x 100 | Rapid Dry Pro80 x 120 |
|---|---|---|---|---|---|
| Curing Area(Lamp Glass) | 45 x 55 cm(18" x 22") | 45 x 70 cm(18" x 28") | 60x 83 cm(24" x 33") | 66 x 102 cm(26" x 40") | 76 x 118 cm(30" x 47") |
| Overall Size(W x L x H) | 51 x 97 x 125 cm(20" x 38" x 49") | 51 x 112 x 125 cm(20" x 44" x 49") | 66 x 125 x 125 cm(26" x 49" x 49") | 72 x 145 x 125 cm(28" x 57" x 49") | 82 x 160 x 125 cm(32" x 63" x 49") |
| Lamps | 9 x 1.500 W | 9 x 1.500 W | 12 x 1.500 W | 12 x 1.500 W | 15 x 1.500 W |
